Talk About the Latest in Home Automation/Home Electronics
Home Automation Forum

Smarthome Forum
Login or Register
 
Home | Profile | Register | Active Topics | Search | FAQ | Smarthome
 All Forums
 General Discussion
 Intercoms & Phones
 Intercom Page out to WHM Speakers
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

kevinkhaz
Starting Member

USA
3 Posts

Posted - 03/22/2012 :  02:58:03 AM  Show Profile  Reply with Quote
I'm working w/ the Channel Vision 6 station A106. I need to integrate it into the Xantech D5SH4. Whole House Music System, I intentionally did not buy the channel Vision WHM or the OnQ because the specs for the WHM part were weak at best.
With that said One grey fox Module won't cut it. Does anyone have access to Xantech's RS232 Protocol. I can use the Page out Audio & trigger from the intercom. I could use IR via several devices on hand, but I would need to know the status of the current WHM system, so I can "put it back" to the state it was in after the all page went through. I will hack the xantech, everything should be IP at this point anyway. IF anyone has any additional information on the Xantech D5SH4 forward it to me, or any better ideas would be appreciated.
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
Smarthome Forum © 2000-2014 SmartLabs, Inc Go To Top Of Page
Powered By: Snitz Forums 2000 Version 3.4.07