Talk About the Latest in Home Automation/Home Electronics
Home Automation Forum

Smarthome Forum
Login or Register
Home | Profile | Register | Active Topics | Search | FAQ | Smarthome
 All Forums
 General Discussion
 ultiple Devices Respond
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

Starting Member

1 Posts

Posted - 10/05/2012 :  4:22:49 PM  Show Profile  Reply with Quote
An Insteon device was added to a scene. Now I want to remove it. How do I eliminate one responder (part 2472D) from the equation? Glen


8608 Posts

Posted - 10/05/2012 :  4:29:27 PM  Show Profile  Reply with Quote
If you are using HouseLinc's Scene tool, select the scene, uncheck the Responder box for the 2472d, Save the scene, then give HouseLinc time to write the changes to all the controller and responder devices in the scene.

If you are manually linking and unlinking with Set buttons, put the controller scene into unlinking mode first, then within 4 minutes hold the 2472d's Set button down for 5 seconds. (The technique for entering unlinking mode varies depending on which device you are using as scene controller. If it is a SmartLinc, go into the scene settings and click the Remove button. For other kinds of devices, see the online Owner's Manual for details.)

Volunteer Moderator & Home Automation Enthusiast
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
Smarthome Forum © 2000-2014 SmartLabs, Inc Go To Top Of Page
Powered By: Snitz Forums 2000 Version 3.4.07