Talk About the Latest in Home Automation/Home Electronics -
Home Automation Forum

Smarthome Forum
Insteon Home Automation
Login or Register
 
Home | Profile | Register | Active Topics | Search | FAQ | Smarthome
 All Forums
 General Discussion
 Intercoms & Phones
 IC5002 Question
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

stevewier
Starting Member

USA
11 Posts

Posted - 12/29/2014 :  06:45:09 AM  Show Profile  Reply with Quote
The IC5002 states that it has "normally open dry output contact closure to ring a customers 3rd party chime". However, since most chimes use a transformer and 24v's, I am not sure how I can use the dry output contacts on this unit to ring my doorbell. If I wire it using the typical door bell button wiring, the unit would be getting 24v. Since this is a new construction scenario, I looked for chimes that accept a dry contact closure to ring the bell and have come up empty. Any suggestions would be appreciated.

BLH
Advanced Member

5599 Posts

Posted - 12/29/2014 :  08:06:52 AM  Show Profile  Reply with Quote
Dry Closure indicates it would act like a Door Bell Push button. So wire it as the door bell button. In a typical door bell wiring scheme.
Just verify the output is rated at the voltage and current the door bell you are using is in its specification.

Edited by - BLH on 12/29/2014 08:07:25 AM
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
Smarthome Forum © 2000-2017 Smartlabs, Inc Go To Top Of Page
Powered By: Snitz Forums 2000 Version 3.4.07