Talk About the Latest in Home Automation/Home Electronics -
Home Automation Forum

Smarthome Forum
Insteon Home Automation
Login or Register
 
Home | Profile | Register | Active Topics | Search | FAQ | Smarthome
 All Forums
 General Discussion
 Insteon
 Looking for .UMP map files for an old 2414U PLC
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

vwmdaggie
Starting Member

11 Posts

Posted - 03/26/2018 :  11:20:38 AM  Show Profile  Reply with Quote
Hi I am trying to resurrect an old 2414U PLC to control an EZIO40 that I use to control my greenhouse misting systems, but my old Windows XP machine (the only thing that can talk to it anymore) died. I have resurrected another old PC with XP but am missing some files. While I can find the SDM3 Device Drivers for the 2414U which are included in the simplehomesuite zip files, the *.ump mapping files aren't there and I can't find them on the smarthome site or elsewhere. Does anyone still have these?

jackman
Average Member

176 Posts

Posted - 03/26/2018 :  11:30:20 AM  Show Profile  Reply with Quote
I have 2 files named plc-2C.ump and plc-3D.ump. If that's what you need contact me with a PM with your email address and I'll send them to you.
Go to Top of Page

vwmdaggie
Starting Member

11 Posts

Posted - 03/26/2018 :  11:59:13 AM  Show Profile  Reply with Quote
Thanks again! Sent you email thru forum link.
Go to Top of Page

vwmdaggie
Starting Member

11 Posts

Posted - 03/26/2018 :  1:18:34 PM  Show Profile  Reply with Quote
awesome that worked! Anyone else needing these can PM me.
Go to Top of Page

jackman
Average Member

176 Posts

Posted - 03/26/2018 :  1:27:28 PM  Show Profile  Reply with Quote
Good to know.
Go to Top of Page

BLH
Advanced Member

5705 Posts

Posted - 03/26/2018 :  3:50:12 PM  Show Profile  Reply with Quote
What version of SDM3 is installed from the Simplehomenet suite?
SDM3-308 was the last one given to us in the Developers Group.
It had eight UMP files in it but I believe only two covered the two firmware versions in the 2414U.

It was one of the programs we could freely distribute.
Too bad most of the developers sites are now gone. Where you could download it.

Edited by - BLH on 03/26/2018 3:56:13 PM
Go to Top of Page

vwmdaggie
Starting Member

11 Posts

Posted - 03/26/2018 :  4:16:11 PM  Show Profile  Reply with Quote
SDM version still apparently .308. The one I have was included in the simplehomenet suite zip file, but did not include any map files. still like the PLC because it can run a timer independently after programming, the PLM as far as I can figure out would require a 24/7/365 PC running controlling software to trigger EZIO40, and also like that I can trigger EZIO from an insteon switch as well for on demand misting cycle too. Can't figure out what new solution is in Insteon world. I have to have something that can trigger a pump and valve at the same time for two different misting circuits, needs to go off twice a day. If you have any ideas let me know. Everything I'm using is discontinued (EZIO40 and 2414U) The pump and valve controls are 120AC.
Go to Top of Page

BLH
Advanced Member

5705 Posts

Posted - 03/27/2018 :  03:23:09 AM  Show Profile  Reply with Quote
The EZIO4O has been replaced by a IoT4R. Smartenit indicated it is equivalent to the EZIO4O with an added WiFi feature.
So if yours fails it could be replaced.
I don't have any experience with the Insteon HUB. So I don't know if it can do what you need.
I know a base model ISY-994i with a 2413S PLM could do it easily. It can stand alone after you program it. Also can do the now standard Insteon I2CS messaging. The 2414U/S could not.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
Smarthome Forum © 2000-2017 Smartlabs, Inc Go To Top Of Page
Powered By: Snitz Forums 2000 Version 3.4.07