Talk About the Latest in Home Automation/Home Electronics
Home Automation Forum

Smarthome Forum
Login or Register
 
Home | Profile | Register | Active Topics | Search | FAQ | Smarthome
 All Forums
 General Discussion
 Speakers, A/V & Home Theater
 IP2IR with audio sensor such as Xantech SMAUD01?
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

jesnoe
Starting Member

Denmark
1 Posts

Posted - 11/13/2011 :  4:06:09 PM  Show Profile  Reply with Quote
I have a GlobalCache IP2IR and essentially I would like to connect it with a sensor such as Xantech SMAUD01, so that I can make the IP2IR emit a "power on command" to my receiver when there is an audio signal for it (sensed byt the SMAUD01).

The sensor would be sitting on the "line out" signal of a Sonos ZP90 feeding into my Yamaha RXV-1800 receiver. When the sensor detects audio coming from Sonos it should trigger the IP2IR which should then send IR commands for powering on receiver, selecting input etc.

Are the IP2IR and the SMAUD01 compatible - or can you recommend another way of obtaining what I want with an IP2IR?

Appreciate any help you can give me!

Cheers!

\JesNoe

epolanco
Starting Member

1 Posts

Posted - 12/18/2011 :  02:44:30 AM  Show Profile  Reply with Quote
The Xantech Audio Sensor will close the contact while detecting the audio signal. You will need a device to initiate the power up command based on that. Even thou GC have optional sensors to detect contact clousure, I believe you still need extra gears (mostly software) to accomplish your task. I don't think it will work as stand alone.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
Smarthome Forum © 2000-2014 SmartLabs, Inc Go To Top Of Page
Powered By: Snitz Forums 2000 Version 3.4.07