Talk About the Latest in Home Automation/Home Electronics -
Home Automation Forum

Smarthome Forum
Insteon Home Automation
Login or Register
Home | Profile | Register | Active Topics | Search | FAQ | Smarthome | Security and Privacy
 All Forums
 General Discussion
 Computer Interfaces
 Direct Commands for iolinc
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

Starting Member

11 Posts

Posted - 07/28/2016 :  6:36:38 PM  Show Profile  Reply with Quote
Does anyone know what the on/off commands are for the iolinc module?
I found everything I need in leftovercode for light switches but it did not have any information on the iolinc module.

However, I did find in the "insteon command list" the following examples:

0x45 69 I/O Output ON Output Turn ON output specified in Cmd2 DevCat 0x07
0x46 70 I/O Output OFF Output Turn OFF output specified in Cmd2 DevCat 0x07, EZIO

From that I get that the command for ON is 45 and OFF is 46 but I don't know what value it wants for Cmd2. It calls it "Output" but doesn't explain what it is.

Anybody have experience with this?

SOLVED: After some testing I found that the command is the same as for lights. The information above from the "command list" is not applicable for iolinc 2540.
Use 11FF for ON and 1300 for OFF

Edited by - 999 on 07/29/2016 07:03:25 AM
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
Smarthome Forum © 2000-2018 Smartlabs, Inc Go To Top Of Page
Powered By: Snitz Forums 2000 Version 3.4.07