Talk About the Latest in Home Automation/Home Electronics -
Home Automation Forum

Smarthome Forum
Insteon Home Automation
Login or Register
Home | Profile | Register | Active Topics | Search | FAQ | Smarthome | Security and Privacy
 All Forums
 General Discussion
 Thermostats & HVAC Control
 No C Wire Heat Only Ecobee question
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

Starting Member

9 Posts

Posted - 03/07/2018 :  08:05:23 AM  Show Profile  Reply with Quote
My ding dong contractor is set in his old ways and installed 3 locations of R and W wires without the C. the system itself has a C but he never ran the wires. i only noticed this mistake now that im moving in and he insisted on not installing them in the beginning when we were in construction. the only thing i can do is power the units where they are. if i can tap to the electrical wiring which i think i can based off some small research i will be able to get a transformer something like this

just want to make sure that would work.

if there is any other feedback or knowledge here that would be great. i dont want to buy these items have him try and install it and it still not work.

i know there are plug-able transformers but i do not want to see any wires or plugs.
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
Smarthome Forum © 2000-2018 Smartlabs, Inc Go To Top Of Page
Powered By: Snitz Forums 2000 Version 3.4.07