Talk About the Latest in Home Automation/Home Electronics -
Home Automation Forum

Smarthome Forum
Insteon Home Automation
Login or Register
 
Home | Profile | Register | Active Topics | Search | FAQ | Smarthome | Security and Privacy
 All Forums
 General Discussion
 Lighting and Appliance Control
 Ballast Dimmer 2475DA2
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

Pabtastic
Junior Member

34 Posts

Posted - 01/12/2019 :  06:10:16 AM  Show Profile  Reply with Quote
I have the majority of my house on Insteon Dimmers, Thermostats etc - I recently was remodeling my basement and the lights i chose have the 0-10V dimmer capability. It appears that the only option i have to tie them into my Insteon system and make them dimmable is to use the 2475DA2. However it is no where to be found. Smarthome, Ebay, Amazon... Has it been discontinued and is there a replacement. Is there a better way i am missing? Thanks in advance for any help.

oberkc
Moderator

USA
3949 Posts

Posted - 01/12/2019 :  07:28:55 AM  Show Profile  Reply with Quote
Does your house have a hub or controller of some type? Does it speak anything other than insteon?
Go to Top of Page

Pabtastic
Junior Member

34 Posts

Posted - 01/12/2019 :  07:48:24 AM  Show Profile  Reply with Quote
Yes - I have an ISY 994. I have only used it for Insteon. This is what it says in Help since i really dont know a ton about it or if it does control other products.

Insteon_UD994_OADR v.4.5.4
Insteon_UD994 v 4.6.2
ISY 994i (1120)
- Open ADR (21010)
- Z-Wave (21100)

Thanks!
Go to Top of Page

BLH
Advanced Member

5995 Posts

Posted - 01/12/2019 :  08:02:06 AM  Show Profile  Reply with Quote
If you use a web search for the products sales page.
The sales page for the 2475DA2 says "Product Is Unavailable".
It could be discontinued, being redesigned or a long time until in stock again. I suspect discontinued.
Smarthome did not elaborate on its status.

I don't have another Insteon Module in mind. That can do a 0-10VDC Fluorescent Ballast dimmer control.

I see you also have Z-Wave. Maybe someone may have more information for you.

Since you have an ISY994i. Have you asked in the UDI forums?
https://forum.universal-devices.com/

Edited by - BLH on 01/12/2019 08:22:30 AM
Go to Top of Page

oberkc
Moderator

USA
3949 Posts

Posted - 01/12/2019 :  10:56:49 AM  Show Profile  Reply with Quote
I was thinking same thing as BLH....since you have z-wave capability with the ISY-994, maybe there is something to be found there. Unfortunately, I have no first-hand experience with any such device.
Go to Top of Page

Pabtastic
Junior Member

34 Posts

Posted - 01/12/2019 :  3:12:20 PM  Show Profile  Reply with Quote
Thanks for the help. Ill try looking into seeing if Zwave has something first.... sounds like that would be the simplest place to start.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
Smarthome Forum © 2000-2019 Smartlabs, Inc Go To Top Of Page
Powered By: Snitz Forums 2000 Version 3.4.07