Talk About the Latest in Home Automation/Home Electronics -
Home Automation Forum

Smarthome Forum
Insteon Home Automation
Login or Register
 
Home | Profile | Register | Active Topics | Search | FAQ | Smarthome | Security and Privacy | Do Not Sell My Info
 All Forums
 General Discussion
 Insteon
 70275 water valve
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

cksedg
Average Member

116 Posts

Posted - 05/18/2020 :  7:42:00 PM  Show Profile  Reply with Quote
I hope some of you experts can help me:

I finally got around to installing my 3/4" Insteon 70275 water valve at my cabin. But the fittings on both sides leak! It doesn't matter how many wraps of Teflon tape or how tight I tighten them--they still leak. I read somewhere a long time ago (can't find it again) that the fittings on the valve are British, so you have to get an adapter from BSPP to NPT threads. I got those (at 15 bucks each!), but they still leak! Are they tapered? Does anyone know what fittings I need to use to go from this valve to PEX 3/4" pipe? I am at a loss.
Thanks,!

cksedg
Average Member

116 Posts

Posted - 05/19/2020 :  12:25:29 AM  Show Profile  Reply with Quote
Also, I have this valve connected to a 2450 I/O Linc. Whenever I turn the Linc on remotely (from my phone), almost every other Insteon switch in my cabin turns on! And turning the Linc off also turns all the switches off. I have deleted the Linc from the app and reinstalled it, but same thing. Thanks for any help you can give me.
Go to Top of Page

BLH
Advanced Member

6156 Posts

Posted - 05/20/2020 :  03:25:19 AM  Show Profile  Reply with Quote
Sounds like you got got the 2450 in a scene as a controller for all the other modules in the Cabin.
You may want to try a factory reset on the 2450 and then reprogram it.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
Smarthome Forum © 2000-2020 Smartlabs, Inc Go To Top Of Page
Powered By: Snitz Forums 2000 Version 3.4.07