Talk About the Latest in Home Automation/Home Electronics -
Home Automation Forum

Smarthome Forum
Insteon Home Automation
Login or Register
 
Home | Profile | Register | Active Topics | Search | FAQ | Smarthome | Security and Privacy | Do Not Sell My Info
 All Forums
 General Discussion
 Insteon
 2467DH Going bad?
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

frankjw
Senior Member

USA
237 Posts

Posted - 05/22/2020 :  12:03:36 PM  Show Profile  Reply with Quote
I have a 2467DH V.28 that recently developed some odd behavior. If the switch goes to 100% then the lights on the switch all blink several times. Turning the switch off and the lights respond with no problem. However if I program the switch to only go to 95% load using my ISY994i then there doesn't seem to be an issue.

I have reset, restored and reprogrammed and it doesn't seem to change the behavior.

Is it time to replace the switch?

oberkc
Moderator

USA
4094 Posts

Posted - 05/22/2020 :  3:33:59 PM  Show Profile  Reply with Quote
quote:
Is it time to replace the switch?


I recall a time when the switch and load and less flashed when turning them on manually, though it seemed to respond to commands from other devices. I don't recall ever being able to solve that one and ended up replacing the switch.
Go to Top of Page

BLH
Advanced Member

6156 Posts

Posted - 05/23/2020 :  03:28:34 AM  Show Profile  Reply with Quote
I also remember that fact.

I believe they did a hardware change of an internal choke coil. To help minimize the flickering.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
Smarthome Forum © 2000-2020 Smartlabs, Inc Go To Top Of Page
Powered By: Snitz Forums 2000 Version 3.4.07